Everything Else
At SSi, we produce such a wide variety of specialty products, and each
cannot have it's own page. So in an attempt to ensure you get the
best exposure to our complete product line, everything which cannot be
listed on it's own will probably be found here. If you cannot find
what you need here, please contact the sales staff for assistance.
No 48001500
11 1/2"W x 10"H x 2 1/4"D
Cut-out 10" x 8 1/2"
Panel area 8 1/2"W x 6 1/2"H
 |
Ideal for smaller engine panels and other electronics
|
|
Spray resistant acrylic door and handle and catch
|
|
UV stable urethane/acrylic hinge
|
No 48002500
15"W x 10"H x 2.25D
Cut-out 13.5" x 8.5"
Panel area 12"W x 6.5"H
Footwell/Glove Box
No 49305600 (pictured) click for larger image
20 5/8"H x 18 5/8"H x 8 1/2"D
|
New concept footrest includes our popular glove box (No
49102000) for additional lockable storage |
No 49305000 (not shown)
20 5/8"W x 18 5/8"H x 5 3/4"D
|
Same as footrest above without the lockable glove box |
Console Glove Storage Boxes
No 49102000
18 1/2"W x 6 1/2"W x 5"D
Cut out 16 1/2"W x 4 1/2"H
|
Attractive "Slimline" styling provides a handy console
storage area |
|
Particularly suited for mounting areas with a reverse
draft or undercut |
|
Lockable Southco® slam latch for security |
|
Sturdy gasketed door |
No 49102500
Available for OEM sales without door gasket
|
No 49108000............white slam latch |
|
No 49108900............stainless steel lacking slam
latch 9 1/2"W x 9"H x 10"D |
|
No 49107000............white slam latch |
|
No 49107900............stainless steel locking slam
latch 9 1/2"W x 9"H x 7"D |
|
Each has a stainless steel hinged STARBOARD® door |
Lockable VHF/Storage Box
No 47605000
9 3/8"W x 12 /4"H x 4 1/2"D Cut out 7 1/8"W x 11 1/4'H
|
Acrylic capped ABS |
|
Stainless steel hinge |
|
STARBOARD® door with a stainless steel restraint |
|
Lockable slam latch |
Console Storage Box
No 46601000
13 1/2"W x 15 1/2"H x 5 1/2"D
|
Integrally molded areas for a "compact" 5BC fire extinguisher
and storage |
|
Gasketed "Slimline" door with an Orcas® slam latch |
|
Molded in high gloss weatherable capped ABS |
|
Ideal for small boats and inflatables |
|
OEM sales only |
Large Recessed Storage Lockers
No 46101000
No 46101500
19 3/4"W x 11 3/4"H x 7 1/4"D Cut out 18"W x 10"H
|
Two styles to increase your available storage area |
|
Made of weatherable capped ABS |
|
Model no 46101500 contains continuous stainless steel hinge |
Tilt Out Glove Box
No 47748000
17 3/4"W x 8 3/4"H x 4 1/2"D
|
Tilt out bin with two removable dividers |
|
"Slimline" styled door will open 180° for
access |
|
OEM sales only |
Shore Power Cord and Connector Box
No 4481500
18 1/2"W x 21 1/4"H x 6 3/8"D
|
Connect and store 30 amp shore power and phone cords |
|
Molded areas to support coiled power cord and install
connector |
|
Gasketed "Slimline" door with hidden fasteners |
|
High gloss acrylic capped ABS |
Shore Power Connector Box
No 44826000 14 3/8"W x 11"H x 5 3/4"D
|
Sturdy "Slimline" door with Southco® "grabber" latches |
|
Sleek appearance with hidden fasteners |
|
Reinforced mounting area with holes for two 30 amp fittings |
|
Custom hole patterns available for OEM sales |
|
Glossy acrylic capped ABS |
Binocular Case
Protect Your Investment!
No 38106000
12 1/4"W x 10 3/4"H x 5"D
|
All new Design safely stores all sizes up to 7 x 50 with
compass as well as most models of stabilized binoculars
|
|
Molded from flexible whit UV resistant low density polyethylene
with predrilled mounting holes
|
|
New hinge design holds the lid closed or open while allowing
easy access
|
Recessed Control Panels
No 47800000
No 47810000
17"W
x 8 3/4"H x 1 1/2"D OD
12"W x 7"H x 1 1/2"D OD
15"W x 6 3/4"H ID
10 1/4"W x 5"H ID
|
Two sizes for recessed livewell electric and other
controls |
|
Provides sturdy mounting for valves and switches |
|
Made of white weatherable capped ABS plastic |
Recessed Switch Pocket
No 4740000 (white)
4740001 (black)
11 1/2"W x 5 5/8"H x 1 5/8"D OD Cut out 9"W x
3 1/2"H
|
Provides a switch mounting area |
|
Made of weatherable capped ABS plastic |
Pedestal Winch Handle Holder
No 70064000
|
12" Tall x projection from pedestal column 2 1/2" |
|
Contoured to fit snugly around 3 1/2" to 4" steering
pedestal columns |
|
Large enough for most ratchet handles |
|
Keep winch handle within reach |
|
Made of flexible low density polyethylene |
|
Backing plate and stainless steel hose clamps included |
Pontoon Boat Light Housing
No 46900100
|
Fits port or starboard sides on a 6" radius |
|
Designed for standard or tubular dock lights |
No 46930000S
|
Fits port or starboard sides on a 21" radius |
|
Includes stainless steel mounting studs |
|
